Bendix Remanufactured AD-9 Air Dryer - 109685PG
Details
Your air brake system requires clean air to avoid freeze-ups and damage to other components. Air dryers are used to remove contaminants, such as vapor, from the air system. Without routine maintenance work, truck owners and operators may find themselves paying for costly repairs. Trust Bendix to get you replacement air dryer parts for your commercial vehicle.
This reman AD-9 air dryer with drain valve is to be used to remove oil and particulate from moving downstream. Cartridge life up to 12 months in standard service applications and 6 months in severe service applications. By using this air dryer, drivers will see an increase in life of the air brake system as it helps prevent the system from freeze-ups and other costly maintenance demands. The Bendix AD-SP air dryer makes sure only clean air enters the system and protects other components within the air brake system. This 12 volt system contains a .25 inch control port and .5 inch delivery and supply ports and features 100% new desiccant. It also contains a soft seat purge valve assembly, can be used in eith.
This product contains a one year warranty.
Bendix Commercial Vehicle Systems, known as Bendix for short, is headquarted in Elyria, Ohio with manufacturing plants scattered across the United States. As part of Knorr-Bremse, Bendix continues to be a leading supplier of air brake system solutions for all types of heavy-duty applications. When in need of replacement air dryers and components, turn to Bendix!
Cross References
109685P, 109685PG, 109685PGX, 745-109685PG, 745109685PG, AT065226C, AT065226CTEC, BW109685PG, BX109685PG, FS109685XPF, OTR109685, R955109685PGX
Specifications
| Item-Level GTIN: | 4068078345870 |
| EXPI Data (Country of Origin): | Mx |
| EXPI Data (Core Group): | 9 |
| Item Quantity Size UOM: | Ea |
| Description (Long Product Description): | Air Dryer |
| Air Dryer Type: | Stand-Alone |
| Body Mounting: | A~ .425 Hole With 3/8-24 Unf-2A Bolted Joint (8X) |
| Cartridge Stabilizer Ring Included: | No |
| Cartridge Thread: | 5/8-11 Unc-2A |
| Cartridge Type: | Puraguard (Coalescing) |
| Cautionary Note(S): | Do Not Replace Pg Cartridge With Standard/Gc Cartridge. |
| Clamp Band Angle (Cw From Sup): | Not Applicable To This Part |
| Clearance To Remove Cartridge: | 11.00 In |
| Control Port: | 1/4-18 Npt |
| Cut-In Pressure: | Not Applicable To This Part |
| Cut-Out Pressure: | Not Applicable To This Part |
| Delivery Port 1: | 1/2-14 Npt |
| Delivery Port 2: | Not Applicable To This Part |
| Extended Purge Port: | Not Applicable To This Part |
| Governor Included: | No |
| Governor Mounting Bracket: | Not Applicable To This Part |
| Governor Mounting Bracket Angle (Ccw From Sup): | Not Applicable To This Part |
| Governor Type: | Not Applicable To This Part |
| Heater / Thermostat Rating: | 12V / 75W |
| Heater Connector Color: | White |
| Heater Connector Type: | Metri-Pack 280 Series 2-Way Sealed Connector (Male) |
| Lower Mounting Bracket: | Not Applicable To This Part |
| Lower Mounting Bracket Angle (Ccw From Sup): | Not Applicable To This Part |
| Market Indicator: | Aftermarket Remanufactured |
| Maximum Inlet Temperature: | 160 Adegf (71 Adegc) |
| Minimum Operating Temperature: | -40 Adegf (-40 Adegc) |
| Purge Exhaust Port: | Open (No Cover) |
| Purge Valve Type: | Hard Seat |
| Purge Volume: | Standard |
| Remote Fill Feature: | Not Applicable To This Part |
| Remote Purge Port: | Not Applicable To This Part |
| Safety Valve Opening Pressure: | 200 Psi |
| Supply Port: | 1/2-14 Npt |
| Turbo Cut-Off Function: | Not Applicable To This Part |
| Upper Mounting Bracket: | Not Applicable To This Part |
| Upper Mounting Bracket Angle (Ccw From Sup): | Not Applicable To This Part |
| Upper Mounting Bracket Height (From Lower Mounting Bracket): | Not Applicable To This Part |
| Upper Mounting Type: | Not Applicable To This Part |
Returns, Warranty & Cores
Ratings & Reviews
No reviews available
Be the first to Write a Review