MGM 3030 Brakes chamber, 12 In. - 3230551X

Early signs of failing spring brake chambers often go unnoticed without visual inspection. When performing routine maintenance on your semi-truck or other commercial vehicle, you may want to check to see if the brake chamber rod is bent; isn't fully retracting or chamber and slack adjusters are out of adjustment. It could be time for a replacement. After all, brake chambers should be replaced every two-five years.

This TR3030LP3 specialty brakes chamber is designed for Intraxx and Vantraax suspension systems. The TR-LP3 model with composite guide-corrosion fighter technology features a tamper-resistant design and center hole diaphragm. It contains an epoxy-coated head and long life power spring (spring size 30) as well as a weather-seal plug. With an externally stored release bolt, and molded nitrile rubber air seal, it has the added benefit of a 3 inch long stroke. This specialty brake chamber contains 3/8-18 inch NPTF port sizes; a 5/8-11 mounting bolt thread and 1.54 mounting bolt length. Service size is 30. It's "A" measurement is 9.99; "B" measurement is 7.61 inches; "C" measurement is 8.32 inches; "D" measurement is 8.21 inches; "E" measurement is 4.75 inches; "F" measurement is 5/8-11 UNC; "G" measurement is 5/8-18 UNF and inlets are 3/8 -18 NPTF. X-min measures 12 inches.

MGM's limited warranty depends on product and application. Contact us to learn more!

Since 1956, MGM has been a top solution provider of quality spring brake actuator technology and electronic brake monitoring systems servicing trucks, buses, and other types of heavy-duty commercial vehicles. When in need of replacement air disc brake parts and components for your heavy-duty application, turn to MGM Brakes!